Battery Saver

Print Friendly, PDF & Email

The Battery Saver option helps you save power and increase usage time of device before charging battery again. You can configure the settings to save power based on your priority.

To configure Battery Saver, follow these steps:

  1. Open Quick Heal app.

  2. Navigate to Device Optimization > Battery Saver.

  3. Ensure that you have enabled this feature after granting the required permissions to enable this feature.

  4. On the Battery Saver screen, you can configure the following options:

    • Enable Battery Saver: Set the battery level when the Battery Saver mode should start.
    • Set Screen Brightness: Set the screen brightness after Battery Saver mode starts.
    • Set Screen Timeout: Set the screen timeout after the Battery Saver mode starts.

Activating Battery Saver mode

  1. Open Quick Heal app.
  2. Navigate to Device Optimization > Battery Saver
  3. Tap the % for Enable Battery Saver. Select the percentage at which the Battery Saver should get activated and tap Okay.

Setting screen brightness

  1. Open Quick Heal app.
  2. Navigate to Device Optimization > Battery Saver.
  3. Tap the % for Set Screen Brightness. Select the percentage at which screen brightness should become when the Battery Saver is activated and tap Okay.

Setting Screen timeout

  1. Open Quick Heal app.
  2. On the Dashboard, navigate to Device Optimization > Battery Saver.
  3. Tap the % for Set Screen Timeout.
  4. Select the duration after which screen should turn off once the Battery Saver is activated.
  5. Tap Okay.

Additional Settings

  • Disable Sync: Select this check box to disable auto-sync of the device automatically in Battery Saver mode.
  • Auto Boost: Select this checkbox to kill apps when the screen is off for 30 mins.
  • Disable Bluetooth: Select this check box to disable Bluetooth network automatically when Battery Saver mode starts.
Was this page helpful?